Pressure Cooker Sensor/Switch Replacement KSD105, KSD105A, YCD3005, YCD3008 for Instant Pot Duo, Plus, Crisp, Evo Plus, Nova, Lux (YCD3008 4.8mm Crimp Terminal)

Great easy fix for the pressure regulator for the Instapot.

Worked perfectly and was already calibrated to the right pressure. Still, always check that before using it!

Arrived promptly, easy to fit and didn’t require any calibrating. Fixed the issuue with the high pressure sensor so the unit is now fully functional again.Notes:1. Instant pots come with 4 variants of pressure sensor/switches, make sure you order the right one. There are those units that have the High and Low pressure sensors (two swictches in a sinbgle unit), such as the Duos, and those that have a single High pressure sensor (one switch). For each of these, there are two potential sizes of spade connector. Measure your existing spade connectors to make sure you order the correct one for your unit.2. Replacement is easy, but you should ‘Google’ how to do it. You should note which wires you disconnect go where. Any video or picture showing the replacement should show this, however if you are worried, consider taking a photo to refer to before removing the old one.3. You should ALWAYS inspect the sensor before fitting and run an operational safety test once fitted to ensure correct operation and calibration. Professionals have specialist equipment to measure the pressure, but luckily there is an easy water heating test that suffices. Again ‘Google’ how to do it. If you have not altered the calibration screw settings, removed anything else, and the sensor/switch is working ok, you should not need to calibrate. If not, you have the choice to try to calibrate (again, ‘Google’ instructions and keep in mind that if you have altered the calibration screws or removed/replaced any other related part you may have to recalibrate irrespective of the sensor) or return the sensor for a replacement.