Jokari Keeper Pump & Pour, One Size, Black

I recently received the Jokari Keeper Pump & Pour as a gift from my daughter, and I’m thrilled with the results! This ingenious device keeps your fizzy beverages “fizzy” for an extended period compared to simply using the cap.Using the Keeper Pump & Pour is a breeze – it’s easy to use and incredibly convenient. For someone like me who despises the disappointment of flat sodas, this product is an absolute must-have.If you’re a fan of keeping your drinks delightfully effervescent, I highly recommend the Jokari Keeper Pump & Pour. It has become an indispensable addition to my beverage routine. Cheers to longer-lasting fizz!

It works! Good price for an effective product.

I’ve found this to be an excellent product. I’ll do my best to walk you thorough how I’ve obtained my excellent results:1) After opening the 2 liter bottle of soda I cut off the remaining plastic ring from the top of the bottle. This is a MUST DO for this gadget to work properly.2) Screw on the Fizz-keeper while it is closed tightly. Make sure the plastic washer is on the bottom of the Fizz-keeper. Mine is white. It is this washer that seals the Fizz-keeper to the bottle. Tighten the Fizz-keeper securely to the bottle but do not over tighten it.3) Making sure the Fizz-keeper’s bulb is latched completely to itself. Then simply pump the bulb. I hold the bottle with one hand, squeezing the bottle slightly as I pump the bulb with the other. You will feel the bottle tightening as you pump air into it. If it doesn’t begin to tighten something is wrong. It isn’t completely closed or screwed to the bottle well or missing the washer or detective. So when the bottle becomes slightly hard to squeeze it is tight enough. It is this preasure that holds in the carbonation. Don’t over pump the bulb because this will build unnecessary pressure inside of the bottle causing the Fizz-keeper to be harder to open and resulting in a loud “pop”. Maybe even blowing it off of the bottle causing injury or worse. You would have to be a pumping fool to achieve this much pressure but it could happen. Don’t worry, with a little practice you will get the “feel” of all of this pretty quickly.4) When I’m ready for some soda I press the release lever as I hold the bottle. Don’t be supsuprised if there is a “pop” when opening. This is nomal and it assures that the bottle was pressurized and the drink should stll have carbonation. That’s it.4) The one thing I failed to mention: DON’T SHAKE IT! As with all carbonated beverages, if you shake them the preasure builds and POP goes the Weasel!I’ve had great luck using my little Fizz-keeper and I hope you will too. I felt $9 was a bit too expensive for this but after doing the math it’s not bad. I don’t go through 2 liters of soda quickly and I usually throw away a quarter of it because it’s flat. This little dude has solved that. I realize this is made of plastic and polymer and it will dry out and crack and become useless. But if this thing works for 50 bottles it will have more than payed for itself. Then I’ll buy another one. This review, like all of my reviews, is not paid for in anway. I only do this to be helpful.